IBM SY33-0193-00 manual Did the Certify Service AID Fail AGAIN?

027(continued)

– Run the Format service aid (see “Format Disk” on page 34) to the disk drive.

– Run the Certify service aid again to the disk drive.

Go to Step 028.

028

(From step 027)

DID THE CERTIFY SERVICE AID FAIL AGAIN?

Yes No

029

– Ask the user to recreate the array.

Go to Step 069 on page 2324-15.

030

– Exchange

the

failing

disk

drive

for

a

new

one

(see

“Exchanging

Disk

Drives”

on

page

19).

Go

to

Step

090

on

page 2324-18

to

add

the

disk

drive

to the

group

of

disk

drives

are

available

for

use

by

the

RAID

manager.

031

(From

step

010)

An

array

is

in

the

Degraded

state

if

one

member

disk

drive of the array is mis

a

write

command

has

been

sent

to

that

array. When

an

array

is

in

the

Degraded s

its

data

is

not

protected.

– Using

the

SSA

Configurator and Service Aids Utility, select the appropriate adapte

then

from

the

adapter menuRejectedselectDisks .

– Using the RSM configurator, go to the LogicalRejectedView .and select

ARE ANY DISK DRIVES LISTED?

Yes No

032

A disk drive has not been detected by the adapter.

Go to Step 035 on page 2324-8.

033

(Step 033 continues)

MAPs 2324-7