IBM SY33-0193-00 manual To Set Service Mode With the RSM Configurator

5. To reset Service Mode, press Esc (exit from the Disk Service Aids window).

Note: A disk must be in one of the states: Free Resource, New Resource or Rejected, before it can be formatted or put into Service Mode. Array members, System Resources and Hot-Spare disk drives cannot be formatted or put into Service Mode.

To Set Service Mode With the RSM Configurator

1.Start the RSM Configurator (see “Accessing Service Aids from the RSM Configurator” on page 30).

2. On the Adapter List page, select the required adapter.

3. On the Adapter View page, select the Physical View.

4. On the Physical View page, select the required disk drive.

5. On the Disk View page, click on the Service Mode button at the bottom of the page.

Service Aids and Other Utilities33