13
Sensor I® Expert User Manual
12. [ITEM NO LONGER IN USE]
13. Control Unit Pivot (model 40 only)
The pivot separates the upper portion of the Control Unit from the
lower portion and allows the upper portion to be pivoted back for
belt-mounted mobile use and pivoted forward for bench top use.
14. Belt Clip (model 40 only)
Allows the operator to attach the Control Unit to a belt with the upper
portion of the Control Unit pivoted back.
15. Battery Access (model 40 only)
The portion of the Control Unit below the pivot houses the battery. An
access door secured with four screws allows access to the battery
when the battery needs replacing. Simply pull the battery from both
sides to dislodge the battery from the harness.
16. Tool Cable (model 40 only)
The tool cable is integral with the Handheld Tool and serves as the
means of communication between the Control Unit and the Handheld
Tool. The plug at the end connects to the receptacle on the lower
portion of the Control Unit.