Ingersoll-Rand 4575759 user manual Dynamic Audit

Sensor I® Expert User Manual

Dynamic Audit

1.Press and release the Reset button to power up the wrench (if the wrench is left idle for one minute the wrench will turn off to save battery power).

2.Move the Mode Selection switch to Dynamic Audit.

3.Press the Units key to select the desired Torque units.

4.Attach the angle reference arm (EA-models only) to the wrench, and place the magnet on a magnetic surface.

5.Press and hold in the Reset button. The cap- ture angle will be displayed.

6.With the Reset button held in, use the parameter adjustment knob to adjust the capture angle to the desired value (see the application guide for details). Release the Reset button.

7.Press the Display key until "Pk" is displayed on the lower left-hand side of the screen.

19