Sensor I® Expert User Manual
NOTE
The wrench should only be used for its intended purpose, i.e., for tightening, loosening and auditing purposes. It should be operated using a smooth steady pull at moderate speed on the wrench handle with both feet firmly placed on floor. Specifications apply to the wrench only (without additional apparatus). Accuracies cannot be specified when the wrench is used with torque multipliers or if the wrench is operated incorrectly.
NOTE
The used of universal joints is not recommended. Use of such devices may cause inaccuracies in torque and/or angle measurements. The use of extensions to the handle, or application of force to other parts of the wrench may cause damage, result in personal injury, or may result in inaccurate tightenings.
NOTE
Exceeding the maximum torque noted on the wrench may cause damage to wrench or loss of calibration.
NOTE
Always make sure that the socket is fully engaged on the joint before tightening begins. Failure to do so may cause inaccuracies in torque and/or angle measurements.
