Sensor I® Expert User Manual
End of Tightening Data Dump
Tightening Configuration No | : Torque Control Mode |
Torque Units | : Nm |
Load Units | : kN |
External channel | : Load Cell |
Angle Transducer | : Non Contact Angle Measurement |
Multiplier | : 1.00 |
Serial data during tightening | : Off |
Serial data at end of tightening | : Off |
Tightening Direction | : Clockwise |
Control Strategy | : Torque Control |
Target Value | : 0020 |
Snug Torque | : 0010 |
Low Torque Limit | : 0015 |
High Torque Limit | : 0025 |
Low Angle Limit | : 0020 |
High Angle Limit | : 0040 |
End of Tightening data : |
|
T,0020.4 A,0029 E,0000 |
|
T,0020.7 A,0032 E.0000 |
|
T,0020.9 A,0032 E,0000 |
|
T,0020.1 A,0032 E,0000 |
|
T,0020.9 A,0035 E,0000 |
|
63
