Sensor I® Expert User Manual
Appendix A
These reports are accessed by the methods noted in "Data Storage and Retrieval". The information provided by the optional InterLink software will have a different format.
Sample Reports
Parameter Dump
Tightening Configuration No | : Torque Control Mode |
Torque Units | : Nm |
Load Units | : kN |
External channel | : Load Cell |
Angle Transducer | : Non Contact Angle Measurement |
Multiplier | : 1.00 |
Serial data during tightening | : Off |
Serial data at end of tightening | : Off |
Tightening Direction | : Clockwise |
Control Strategy | : Torque Control |
Target Value | : 0020 |
Snug Torque | : 0010 |
Low Torque Limit | : 0020 |
High Torque Limit | : 0020 |
Low Angle Limit | : 0000 |
High Angle Limit | : 0000 |
62
