6-43
BUS INTERFACE UNIT
6.6.4 Paged DRAM Interface
External logic is required to interface the Intel386 EX processor to DRAM devices, as shown in
Figure 6-18. The PLD generates the RAS# and CAS# signals.
If RAS#-Only Refresh is being performed (using the Refresh Control Unit of the processor), then
during a Refresh Cycle, the PLD enables the Column Address Buffer and asserts the RAS# signal
(shaded sections in the figure). Refer to Chapter 6, “BUS INTERFACE UNIT,” for more infor-
mation.
A single multiplexer can be used instead of the separate row and column address buffers.
Figure 6-18. Intel386 EX Processor to Paged DRAM Interface
Intel386™ EX
Embedded Processor
Row
Address
Buffer
PLD
Upper Address
Row
Address
Paged
DRAM
Column
Address
Address
Lower Address
OE_ROW#
OE_COL#
RAS#
CAS#
BHE#
BLE#
A3264-02
Column
Address
Buffer
CS
n
#
REFRESH#
Note:
A single mux can be used in place of the row and column address buffers.