Intel 470 manual Tag-based Vlan, To configure a tag-based Ieee 802.1Q Vlan

C H A P T E R 4 Using the Web Device Manager

NOTE

When creating a VLAN that includes ports on more than one switch, set the same VID on each switch.

Tag-based VLAN

You configure a tag-based VLAN by configuring port membership and ingress/egress rules. Note: If some of your devices don’t support 802.1Q tags, additional configuration may be necessary.

To configure a tag-based (IEEE 802.1Q) VLAN

1Create a VLAN and assign member ports.

•Click the Configure VLAN menu, and then click Tag-based (IEEE 802.1Q) VLAN.

•From the main Tag-based VLAN page, click Add to create a new VLAN. To modify an existing VLAN, click the VLAN name, and click Modify.

•If you are creating a new VLAN, type a name and VID (from 2 to 4094) to identify it.

•To configure membership of a port to a VLAN, click the port in the Available ports box and click Add. To remove a port, click the port in the Member ports box and click Remove.

•The switch supports a maximum of 12 IGMP Snooping sessions to manage broadcast traffic. If you want the VLAN to be part of an IGMP Snooping session, select the Enable IGMP Snooping check box.

•When you finish adding ports, click Next.

Web Device Manager

37