C H A P T E R 5 Using Local Management

Add an IEEE 802.1Q VLAN (Configure

Port Membership)

Local Management

LOCATION

Main Menu

Configure VLAN

Create an 802.1Q VLAN

NOTE

A ‘+’ next to the Member indicates that the port is a member of more than one VLAN.

Description

VLAN Name: Assigns a name to the VLAN. The name can consist of any character (no spaces) and be up to 12 characters long. After a VLAN is created the name cannot be changed.

VLAN ID: Assigns a unique ID number for the VLAN. This number is used to identify all packets belonging to that VLAN. Type a number from 2 to 4094. The DEFAULT_VLAN (created when you select a VLAN mode) has a VID of 1.

Allow IGMP Snooping: Indicates if the switch performs IGMP snooping on this VLAN (press z). A maximum of 12 IGMP snooping sessions are allowed.

Member: Identifies which ports are part of the VLAN being created. Press z to toggle the following options:

<Yes> The port is a member of the VLAN.

<No > The port is not a member of the VLAN.

The port is part of an aggregated link.

NEXT: Sends you to the Add an IEEE 802.1Q VLAN (Configure Port Tagging) screen.

89

Page 95
Image 95
Intel 470 manual Add an Ieee 802.1Q Vlan Configure Port Membership