C H A P T E R 4 | Intel® NetStructure™ 470T and 470F Switches User Guide |
NOTE
If you change the flow control or IP settings, you must reboot the switch before the new settings can take effect.
Configuring a Port
You can use the Web Device Manager to enable or disable a port, and to change its speed, duplex, flow control, and priority settings.
To change port settings
1Click the Configure Device menu, and then click Port Settings. To access the Port Settings for a port, click the port you want to configure on the faceplate graphic.
2In the boxes, click the options you want to change:
•Port State lets you enable or disable the port.
•Speed/Duplex lets you set port speed and duplex.
•Flow Control lets you enable or disable flow control.
•Priority Queue (802.1p) lets you set the switch priority queue for packets sent or received on this port.
3Click Submit.
32
