Intel 470 manual IP Settings

C H A P T E R 5 Intel® NetStructure™ 470T and 470F Switches User Guide

IP Settings

LOCATION

Main Menu

Configure Device

IP Settings

NOTE

The default IP address for the switch is 192.0.2.1

Default VLAN for SNMP agent

Port-based: DEFAULT_VLAN

tag-based (802.1Q-based): VID=1

Description

Switch MAC address: Displays the unique hardware address assigned by Intel.

Current Settings: Displays the switch’s current IP configuration.

New settings: Assigns a new IP configuration to the switch.

Assign IP: Indicates if the switch uses a BOOTP or DHCP server to obtain an IP address dynamically, or if you assign an address manually.

IP address: Displays the IP configuration used by the switch. Use the IP address shown here to access the switch through Telnet or a ping test.

Subnet mask: Matches the mask for other devices on the network.

Default gateway: Displays the IP address of the device that routes to different networks—typically, a router or routing server. Set this option to manage the switch remotely.

VLAN or VLAN ID (port-based or tag-based VLANs only): Specifies a VLAN where the switch’s SNMP management agent will reside. This option appears only when port-based and tag-based (IEEE 802.1Q) VLANs are active on the switch.

SUBMIT: Submits the changes and returns to the Configure Device screen. You must save the changes to the switch’s flash memory (from the Save Settings menu) and then reboot the switch for the new IP settings to take effect.

54