Intel 470 manual Protocol-based Vlan, To configure a protocol-based Vlan

C H A P T E R 4 Intel® NetStructure™ 470T and 470F Switches User Guide

Protocol-based VLAN

You configure a protocol-based VLAN by creating the VLAN and then adding participating ports. The switch supports up to three protocol-based VLANs: IP, IPX, and NetBEUI. However, each port can be a member of only one VLAN; protocol-based VLANs cannot overlap.

To configure a protocol-based VLAN

1Click the Configure VLAN menu, and then click Protocol-based VLAN.

2Click Add to create a new VLAN, or select an existing VLAN and click Edit to change its configuration.

3If you are creating a new VLAN, type a name in the VLAN Name box and select a protocol from the Protocol list.

4In the Available Ports box, click a port to add to the VLAN, and then click Add.

5When you finish adding ports, click Done.

40