Chapter 5: Setting Up the NDIS Driver

Next, if you want to set up PPP port properties, skip to Setting Up Port Properties on page 86.

X.25 WAN Properties

The X.25 Properties dialog box enables you set up WAN properties for a channel that uses the X.25 protocol. Use this dialog box to define the properties of outgoing calls and choose how to filter incoming calls.

Figure 5-13. X.25 Properties

For detailed information about setting up protocol parameters using this dialog box, see online help.

To set up X.25 WAN properties for the channel, do the following:

1.In the Outgoing call section, set up properties for outgoing calls as follows:

a.In the Remote address field, to route the outgoing call to the remote peer, enter the address of the remote peer. You can add a one or two-digit sub- address to connect to a specific workstation or application on a LAN.

b.In the Local sub-addressfield, if you want the network to provide the local sub-address to the

iSPAN Serial WAN Adapter Users Guide

83