Setting Up Channels for Logical Adapters

For detailed information about setting up protocol parameters using this dialog box, see online help.

To set up Frame Relay WAN properties for the channel, do the following:

1.In the DLCI and Traffic control sections of the Frame Relay dialog box, make sure that properties match those of your Frame Relay provider subscription.

Check with your Frame Relay provider to determine the appropriate parameters. See online help for a detailed description of each property.

2.Click OK to save the Frame Relay properties and return to the Channel properties dialog box.

Next, if you want to set up Frame Relay port properties, continue to the next topic, Setting Up Port Properties.

Setting Up Port Properties

The fields included in Port section of the Channel properties dialog box depend on whether the PPP, X.25, or Frame Relay WAN protocol is selected for the channel.

The topics that follow provide instructions for setting up port properties for a channel.

•To set up PPP port properties, continue to the next topic, PPP Serial Port Properties.

•To set up X.25 port properties, skip to X.25 Port Properties on page 88.

•To set up Frame Relay port properties, skip to Frame Relay Port Properties on page 89.

86

Interphase Corporation