Interphase Tech iSPAN X.25 Port Properties, Figure 5-17.X.25 Channel Port Properties

Setting Up Channels for Logical Adapters

b.Specify the clock, coding, and DSR Timer properties for the serial line.

c.Click OK to save the serial line properties and return to the Channel properties dialog box.

X.25 Port Properties

The following illustration shows the Port section of the Channel properties dialog box when the X.25 WAN protocol is selected.

Figure 5-17. X.25 Channel Port Properties

To set up port properties for a channel using the X.25 protocol, do the following:

1.In the Card field, if more than one physical iSPAN- Serial WAN adapter is installed, select the physical adapter to be used by the channel.

2.In the Network field, if more than one X.25 network configuration has been created for use by the NDIS driver, select the network configuration to be used by this channel.

3.If you need to create, edit, or remove a network configuration to be used for driver connections, do the following:

a.Click the Properties button in the Port section of the Channel properties dialog box.

88 Interphase Corporation