
Setting Up Logical Adapter Network Properties
The Properties dialog box appears for the displayed logical adapter.
Figure3.In the Station Name field, enter the station name for the logical adapter. (This is an optional property.)
CAUTION
In the Local Address field, the default Ethernet address is correct and must not be modified.
4.In the MTU field, enter the MTU (Maximum Transmission Unit) to be used for communication. If you are not sure which value to use, leave the default value.
5.In the Protocols section, select the protocol(s) to be linked to the adapter. At least one of the protocols is required.
You can change the protocols only if you started the NDIS Driver Setup from the Control panel.
72 | Interphase Corporation |