Setting Up Channels for Logical Adapters

Setting Up LAN Properties

The following illustration shows the LAN section of the Channel properties dialog box.

Figure 5-9. LAN Channel Properties

To set up LAN properties for the channel, do the following:

1.Complete information in the fields in the LAN section of the Channel properties dialog box as follows:

a.Check the TCP/IP and/or IPX/SPX fields to select the protocols to be routed through this channel. At least one protocol must be selected.

b.If the TCP/IP protocol is selected, in the TCP/IP Address field, enter the TCP/IP address of the remote equipment in dotted decimal format.

c.If the IPX/SPX protocol is selected, in the IPX/SPX Node Address field, enter the IPX/SPX address of the remote equipment (12 hexadecimal digits).

2.To set up properties for the selected LAN protocol(s), do the following:

a.In the LAN section of the Channel properties dialog box, click the Properties button.

78

Interphase Corporation