SAFETY INSTRUCTIONS
TO AVOID SERIOUS OR FATAL PERSONAL INJURY OR MAJOR PROPERTY DAMAGE, READ AND FOLLOW ALL SAFETY INSTRUCTIONS IN MANUAL AND ON PUMP.
THIS MANUAL IS INTENDED TO ASSIST IN THE INSTALLATION AND OPERATION OF THIS UNIT AND MUST BE KEPT WITH THE PUMP.
in contact with the pumped liquid are made of stainless steel. They are available in different versions according to the position of the suction and delivery ports and the shape of the connection flanges. For the sizes
DANGER
WARNING
This is a SAFETY ALERT SYMBOL. When you see this symbol on the pump or in the manual, look for one of the following signal words and be alert
to the potential for personal injury or property damage.
Warns of hazards that WILL cause serious personal injury, death or major property damage.
Warns of hazards that CAN cause serious personal injury, death or major property damage.
electric motor, make sure that the motor you use is suit- able for coupling to the pump. The
These pumps are suitable for civil and industrial water distribution systems, pressure booster, irrigation (agri- culture, sporting facilities), water treatment, boiler feed, parts washing, cooling - air conditioning - refrigeration and fire fighting applications.
3 |
| Warns of hazards that CAN cause per- |
CAUTION | |
| sonal injury or property damage. |
|
NOTICE: INDICATES SPECIAL INSTRUCTIONS WHICH ARE VERY IMPORTANT AND MUST BE FOLLOWED.
THOROUGHLY REVIEW ALL INSTRUCTIONS AND WARNINGS PRIOR TO PERFORMING ANY WORK ON THIS PUMP.
MAINTAIN ALL SAFETY DECALS.
|
|
| G&L Pumps |
|
|
| ||||
|
|
|
|
| SSV™ |
| 1 | |||
|
|
|
| CATALOG NUMBER |
|
|
| |||
2 |
|
|
|
|
|
|
|
| 4 | |
| GPM |
|
| FEET | RPM | |||||
|
|
|
|
| ||||||
|
|
|
|
|
| |||||
5 |
|
|
|
|
|
|
|
| 7 | |
| DO NOT OPERATE AT CLOSED DISCHARGE | |||||||||
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
| 8 |
|
| Goulds Pumps, ITT Industries, Inc. | ||||||||
WARNING
Hazardous fluids can cause fire, burns or death.
UNIT NOT DESIGNED FOR USE WITH HAZARDOUS LIQUIDS OR FLAMMABLE GASES. THESE FLUIDS MAY BE PRESENT IN CONTAINMENT AREAS.
| 6 |
|
|
1 | Goulds Pumps Catalog Number |
2 | Capacity Range |
3 | TDH Range |
4 | Rated Speed |
5 | Rated Horsepower |
6 | Maximum Operating Pressure |
7 | Maximum Operating Temperature |
The purpose of this manual is to provide the neces- sary information for proper installation, operation and maintenance of the SSV pump. The instructions and warnings provided below concern the standard version, as described in the sale documents. Special versions may be supplied with supplementary instructions leaflets. Please refer to the sale contract for any modifications or special version characteristics. Always specify the exact pump type and identification code when requesting technical information or spare parts from our Sales and Service department. For instructions, situations or events not considered in this manual or in the sale documents, please contact your distributor.
Read this manual before installing and using the product.
Improper use may cause personal injury and damage to property and lead to the forfeiture of the warranty coverage.
The SSV pump is a vertical multistage,
8 Pump Serial Number |
Confirm that the pump is capable of meeting the desired operating conditions.
1. Minimum Inlet (Suction) Pressure
In general, the minimum suction pressure required is that which provides adequate NPSHA necessary to feed the pump. The required NPSHr, expressed in feet, can be found on the performance curve for the pump at the specific duty point. It is recommended that the NPSHA exceeds the NPSHr by a minimum of (2) two feet as a safety margin and to insure long term reliable performance of your SSV pump.
PSMIN = NPSHr + 2 ft.
NOTE: The NPSHA must be calculated for the specific system to which the SSV pump is to be installed. Please contact your dealer/distributor if you require assistance.
