Juniper Networks 10.4 ConfiguringPE2 with a Remote Interface Switch

}
}
}
}
Youverify your configurationon the MX Series router with the show l2circuit connections
command:
user@PE2>showl2circuit connections
Layer-2 Circuit Connections:
Legend for connection status (St)
EI -- encapsulation invalid NP -- interface h/w not present
MM -- mtu mismatch Dn -- down
EM -- encapsulation mismatch VC-Dn -- Virtual circuit Down
CM -- control-word mismatch Up -- operational
VM -- vlan id mismatch CF -- Call admission control failure
OL -- no outgoing label IB -- TDM incompatible bitrate
NC -- intf encaps not CCC/TCC TM -- TDM misconfiguration
BK -- Backup Connection ST -- Standby Connection
CB -- rcvd cell-bundle size bad XX -- unknown
SP -- Static Pseudowire
Legend for interface status
Up -- operational
Dn -- down
Neighbor: 10.255.171.45
Interface Type St Time last up # Up trans
ae0.0(vc 100) rmt Up May 12 14:48:58 2009 2
Remote PE: 10.255.171.45, Negotiated control-word: Yes (Null)
Incoming label: 299872, Outgoing label: 299824
Local interface: ae0.0, Status: Up, Encapsulation:VLAN Q-in-Q and VCI
Interworking
ConfiguringPE2 with a Remote Interface Switch
CE1Configuation ConfigureEthernet over ATMon the ATM interface
[edit]
interfaces{
at-2/0/0{
encapsulationethernet-over-atm;
atm-options{
vpi100;
}
unit0 {
vci100.34;
familyinet {
address30.1.1.1/24;
}
}
}
}
PE1Configuation Configurethe Remote InterfaceSwitch
[edit]
interfaces{
at-2/0/1{
85Copyright© 2010, Juniper Networks,Inc.
Chapter8: MX Series Router in an ATMEthernet Interworking Function