Juniper Networks 10.4 Example:Configuring Ethernet LFM for Aggregated Ethernet

pdu-threshold5;
}
}
}
}
}
2. ConfigureLFM on the PE2 router with CCC:
[edit]
interfacesge-1/0/0{
encapsulationethernet-ccc;
unit0;
}
protocols{
oam{
ethernet{
link-fault-management{
interfacege-1/0/0{
pdu-interval1000;
pdu-threshold5;
}
}
}
}
}
Related
Documentation
MXSeries Ethernet Services Routers SolutionsPage•
•EthernetOAM Link Fault Management on page 137
•Example:Configuring Ethernet LFM Between PE and CE on page 138
•Example:Configuring Ethernet LFM for AggregatedEthernet on page 140
•Example:Configuring Ethernet LFM with Loopback Support on page 142
Example:Configuring Ethernet LFM for Aggregated Ethernet
Inthis example, LFM is configured on an aggregatedEthernet interface (AE0) between
Router1 and Router 2. When configuredon aggregated Ethernet, LFM runs on all the
individualmember links. LFM is enabled or disabled on the member links as they are
addedor deleted from the aggregationgroup. The status of individual links is used to
determinethe status of the aggregatedinterface.
Theuse of LFM with aggregated Ethernet is shown in Figure21 on page 140.
Figure21: Ethernet LFM for Aggregated Ethernet
Copyright© 2010, Juniper Networks,Inc.140
Junos10.4 MX Series Ethernet ServicesRouters Solutions Guide