Juniper Networks 10.4 Example:Configuring Ethernet LFM with Loopback Support

802.3adae0;
}
}
interfacesae0 {
unit0 {
familyinet {
address11.11.11.1/24;
}
}
}
protocols{
oam{
ethernet{
link-fault-management{
interfaceae0;
}
}
}
}
Related
Documentation
MXSeries Ethernet Services Routers SolutionsPage•
•EthernetOAM Link Fault Management on page 137
•Example:Configuring Ethernet LFM Between PE and CE on page 138
•Example:Configuring Ethernet LFM for CCC on page139
•Example:Configuring Ethernet LFM with Loopback Support on page 142
Example:Configuring Ethernet LFM with Loopback Support
Inthis example, LFM is configured between PE and CE. ThePE can put the CE in remote
loopbackmode. This allows the PE to haveall the traffic sent to the CE looped back for
diagnosticspurposes, as shown in Figure 22 on page 142.
Figure22: Ethernet LFM with Loopback Support
Toconfigure LFM betweena PE and a CE:
1. ConfigureLFM loopback on the PE router:
[edit]
interfacesge-1/0/0{
unit0 {
familyinet {
address11.11.11.1/24;
}
}
Copyright© 2010, Juniper Networks,Inc.142
Junos10.4 MX Series Ethernet ServicesRouters Solutions Guide