JVC GR-DVL9800 specifications EN33

EN33

MANUAL MENU

DISPLAY MENU

WIND	OFF	Disengages the function which cuts down on noise created by wind.
CUT	ON	Helps cut down on noise created by wind. “	” appears. The quality of the
		sound will change. This is normal.
FLASH	Refer to “Snapshot Flash” (☞ pg. 34).
FLASH	Refer to “Flash Brightness Adjustment” (☞ pg. 35).
ADJ.
ON	LCD	Keeps the camcorder’s display (except the date, time and time code) from
SCREEN		appearing on the connected TV screen.
	LCD/TV	Makes the camcorder’s display appear on screen when the camcorder is
		connected to a TV.
	SIMPLE	Keeps the indications (except the tape running indicator, warnings, date, time,
		time code, etc.) from appearing in the camcorder. Also keeps the camcorder’s
		display (except the date, time and time code) from appearing on the
		connected TV screen.
DATE/	AUTO	Displays the date/time for approx. 5 seconds in the following cases:
TIME		•When the Power Switch is set from “OFF” to “	” or “ ”.
		•When playback starts. The camcorder displays the date/time when scenes
		are recorded.
		•When the date is changed during playback.
	OFF	The date/time does not appear.
	ON	The date/time is always displayed.
TIME	ON	Time code is displayed on the camcorder and on the connected TV. Frame
CODE		numbers are not displayed during recording.
	OFF	Time code is not displayed.
CLOCK	Allows you to set the current date and time (☞ pg. 9).
ADJ.

: Factory-preset

NOTES:

●The “MANUAL MENU” settings are effective only when the Power Switch is set to “ ”.

●“DISPLAY MENU” functions which are set when the Power Switch is set to “ ” are also applied when the

Power Switch is set to “ ” (☞ pg. 46). “CLOCK ADJ.” only appears when the Power Switch is set to “ ”.

●The “DISPLAY MENU” settings are effective even when the Power Switch is set to “ ”.

●The “ON SCREEN” setting can also be changed by pressing the DISPLAY Button on the RM-V716U remote control (provided) (☞ pg. 59, 62, 73).