JVC EN59, For GR-DVL9800 owners only, Set AV/S-VIDEO to OFF in the Menu Screen pg

Make sure all units are turned off.

Connect the camcorder to a TV or VCR as shown in the illustration (☞ pg. 58).

If using a VCR . . . go to step 3. If not . . . go to step 4.

Connect the VCR output to the TV input, referring to your VCR’s instruction manual.

Turn on the camcorder, the VCR and the TV.

Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.

EN59

C. Connection to a TV or VCR equipped with an S-VIDEO IN and/or A/V input (RCA type) connectors

* When connecting the cables, open this cover. ** The Audio cable is not required for watching still

images with the Power Switch set to “ ”.

To AV

When the S-Video cable is not used.

← Yellow to VIDEO IN

Connector cover*

Core filter

Audio/Video cable [mini-plug to RCA plug] (provided)

White to AUDIO L IN**

TV

Red to AUDIO R IN**

VCR

To S-VIDEO

To S-VIDEO IN

To TV or VCR

	S-Video cable
Core filter
	(provided)

When connecting the S-Video cable, open the LCD monitor.

1

2

3

4

5

6 [For GR-DVL9800 owners only]

Set “AV/S-VIDEO” to “OFF” in the Menu Screen (☞ pg. 46).

NOTES:

To choose whether or not the following displays appear on the connected TV . . .

•Date/Time

.... set “DATE/TIME” to “AUTO”, “ON” or “OFF”

in the Menu Screen (☞ pg. 46). •Time Code

.... set “TIME CODE” to “ON” or “OFF” in the

Menu Screen (☞ pg. 46).

•Playback Sound Mode, Tape Speed And Tape Running Displays for video playback

Or

Directory/File Names and Image Number/Total Number of Images for D.S.C. Playback

.... set “ON SCREEN” to “LCD” or “SIMPLE” in the

Menu Screen (☞ pg. 46). Or, press DISPLAY on the RM-V716U remote control.

●It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack (☞ pg. 7).

●Use the provided cables, making sure to connect the ends with a core filter to the camcorder. The core filter reduces interference.

●To monitor the picture and sound from the camcorder without inserting a tape or MultiMediaCard, set the camcorder’s Power Switch to “ ” or “ ”, then set your TV to the appropriate input mode.

●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.

●If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture.

●Set the video out select switch of the cable adapter as required:

Y/C	: When connecting to a TV or VCR which accepts Y/C signals and uses an S-Video cable.
CVBS	: When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable.