78EN

Display

USINGTHEREMOTECONTROLUNIT

Audio Dubbing

(cont.)

6e Audio Dub

Standby mode

Power Switch

Speaker

MIC (external microphone input) connector*

PHONE (headphones) connector*

The audio track can be customized only when recorded in the 12-bit mode (pg. 31).

NOTES:

Audio Dubbing is not possible on a tape recorded in 16- bit audio, on a tape recorded in the LP mode or on a blank portion of a tape.

To perform Audio Dubbing while watching on the television, make connections (pg. 58, 59).

1 Play back the tape to locate the point where editing will start, then press PAUSE (6).

2 While holding A.DUB (e) on the remote control, press PAUSE (6). “6e” appears.

3 Press PLAY (4) , then begin “narrating”. Speak into the microphone.

•To pause dubbing, press PAUSE (6).

4 To end Audio Dubbing, press PAUSE (6), then STOP (5).

To hear the dubbed sound during playback . . .

.... set “12BIT MODE” to “SOUND 2” or “MIX” in the

Menu Screen (pg. 46, 47).

NOTES:

DISPLAY

PLAY

Remote sensor

Stereo microphone

A.DUB

Audio dubbing is also possible using an optional

microphone connected to the MIC connector.

Sound is not heard from the speaker during Audio

Dubbing. To hear sound, connect optional headphones

to the PHONE connector.

When using an optional microphone or headphones, be

sure to attach the core filter to reduce interference

(pg. 5).

While an optional microphone is connected, the built-in

microphone is disabled.

When editing onto a tape that was recorded at 12-bit,

the old and new soundtracks are recorded separately.

If you dub onto a blank space on the tape, the sound

may be disrupted. Make sure you only edit recorded

areas.

If feedback or howling occurs during TV playback, move

the camcorder’s microphone away from the TV, or turn

down the TV’s volume.

If you change from 12-bit to 16-bit in mid-recording and

then use the tape for Audio Dubbing, it is not effective

PAUSE

RM-V716U

(provided) STOP

* Located beneath the cover.

from the point where 16-bit recording began.

During Audio Dubbing, when the tape moves to scenes

recorded in the LP mode, scenes recorded in 16-bit

audio or a blank portion, Audio Dubbing stops and

“ERROR! REFER MANUAL” appears.

For GR-DVL9800 owners: To perform Audio Dubbing

with a video unit connected to the camcorder’s AV

connector, first set “AV/S-VIDEO” to “ON” in the Menu

Screen (pg. 46). You can hear sound from the video

unit using optional headphones.

Page 78
Image 78
JVC GR-DVL9800 specifications 78 EN, Audio Dubbing, To hear the dubbed sound during playback