JVC GR-DVL9800 specifications EN57, To Print by Selecting Still Images and NO. of Prints

Rotate MENU/BRIGHT to move the green frame to the image you wish to print and press it.

Perform steps 1 through 4 on pg. 56.

EN57

		Display
E X I T		D P O F		VGA
100-DVC00021
0 1 9	0 0	0 2 0	0 0	0 2 1	0 3
0 2 2	0 0	0 2 3	0 0	0 2 4	0 0

MENU/

BRIGHT Wheel

PUSH

DPOF Screen

TO PRINT BY SELECTING STILL IMAGES AND NO. OF PRINTS

1

2 Rotate MENU/BRIGHT to select “SELECTED” and press it. Selection is complete. The DPOF Screen appears.

3

4 Select the number of prints by rotating MENU/ BRIGHT towards “+” to increase the number, or towards “–” to decrease the number and press it. Repeat steps 3 and 4 for the desired number of prints. •The number of prints can be set up to 15.

•To correct the number of prints, select the image again and change the number.

5 Rotate MENU/BRIGHT upward to select “EXIT” and press it. Selection is complete. The Confirmation Screen appears.

6 Rotate MENU/BRIGHT to select “EXECUTE” and press it. The normal playback screen appears.

•To cancel selection, rotate MENU/BRIGHT to select “CANCEL” and press it.

To Reset The No. Of Prints . . .

.... select “RESET” in step 5 on pg. 56. The number of

prints is reset to 0 for all still images.

CANCEL EXECUT E

Confirmation	CAUTION:
Screen
	While performing the above, never disconnect power,
	as this may cause the memory to be corrupted. For
	safety, all buttons including the Power Switch are
	disabled in step 5.
	NOTE:
	To print images recorded on a tape, first dub them to a
	MultiMediaCard (☞ pg. 67).