18ENRECORDING

BasicRecordingForVideo(cont.)

Power Switch

Snapshot (For Video Recording)

Shooting Mode Dial

PS

 

VIDEO

 

DUAL

 

VGA

XGA

OFF

Y

A

L

P

Y

D

ALP CS

Lock Button

Use your camcorder like a regular camera and take a snapshot, or several of them in succession.

This feature lets you record still images that look like photographs onto a tape.

SNAPSHOT MODE SELECTION

SNAPSHOT Button

SNAP MODE Button

INDEX SCREEN Button

1 Set the Shooting Mode Dial to “VIDEO” or “PS”, then set the Power Switch to “” or “ ” while pressing down the Lock Button located on the switch. Pull out the viewfinder fully or open the LCD monitor fully.

2 Choose the appropriate Snapshot mode from the 6 available by repeatedly pressing SNAP MODE until the desired snapshot mode indicator appears.

SNAPSHOT RECORDING

1 Press SNAPSHOT.

If you press during Record-Standby . . .

.... “PHOTO” appears and a still image will be

recorded for approx. 6 seconds, then the camcorder re-enters the Record-Standby mode.

If you press during Recording . . .

.... “PHOTO” appears and a still image will be

recorded for approx. 6 seconds, then the normal recording resumes.

To Use The Flash (pg. 34) . . .

.... slide FLASH OPEN in the direction of the arrow

printed on the camcorder. The flash is raised. If the flash is not needed, push down the flash.

Motor Drive Mode

Keeping SNAPSHOT pressed provides an effect similar to serial photography. (Interval between still images: approx. 1 second)

Display

FUL L Snapshot mode

Page 18
Image 18
JVC GR-DVL9800 EN Recording, Snapshot Mode Selection, Snapshot Recording, Snapshot For Video Recording, Motor Drive Mode