Display
MANUAL MENU
1RE TURN
D I S
SEL F – T I MER
5S
T EL E MACRO
W I DE MODE
W I ND CUT
F LASH
F LASH AD J . + 2
MENU/BRIGHT Wheel
Power Switch
Lock Button
OFF |
|
| C | S | D |
Y |
|
|
|
| |
A |
| P |
|
| |
|
| L |
|
| |
| LP YA |
|
|
| |
Menu Screen
EN35
Flash Brightness Adjustment
When a snapshot (☞ pg. 18, 20) is taken in the dark the camcorder fires the flash (☞ pg. 34) and adjusts the brightness automatically. You can also adjust the flash brightness manually. When you find that the snapshots you took look too bright or too dark, adjust it manually.
1 Set the Power Switch to “ 
” while pressing down the Lock Button located on the switch, then pull out the viewfinder fully or open the LCD monitor fully.
2 Press MENU/BRIGHT. The Menu Screen appears.
3 Rotate MENU/BRIGHT to select “ 
”, and press it. “MANUAL MENU” appears.
4 Rotate MENU/BRIGHT to select “FLASH ADJ.”, and press it. The parameter appears.
5 To intensify the flash, rotate MENU/BRIGHT towards “+”. To weaken the flash, rotate it towards
6 Press MENU/BRIGHT. Rotate it to select “1RETURN” and press it twice to close the Menu Screen.
NOTE:
When you change the subject you are shooting or the shooting location, set it back to ±0 as described in step 5 and take a snapshot to check the flash brightness. After doing this adjust to your desired brightness.
