92 EN
1
2
USER MAINTENANCE
1
2
3
Cassette holder
cover
OPEN/EJECT
Switch
PUSH HERE
Cassette holder
Cover

Cleaning The Camcorder

1
To clean the exterior, wipe gently with a soft
cloth.
Put the cloth in diluted mild soap and wring it
well to wipe off heavy dirt. Then wipe again
with a dry cloth.
2
Press PUSH-OPEN and open the LCD monitor.
Wipe gently with a soft cloth. Be careful not to
damage the monitor. Close the LCD monitor.
3
To clean the lens, blow it with a blower brush,
then wipe gently with lens cleaning paper.
4
To clean the viewfinder, raise it to the vertical
position. Carefully lift the plastic tab on the
bottom of the viewfinder, and open the cover
1.
5
Insert a lens blower or soft cloth into the gap at
the bottom of the viewfinder and clean the
interior of the viewfinder with it 2.
6
Close the cover. Tilt the viewfinder back to the
horizontal position and push it back in.
NOTES:
●
Avoid using strong cleaning agents such as benzine
or alcohol.
●
Cleaning should be done only after the battery
pack has been removed or other power units have
been disconnected.
●
Mould may form if the lens is left dirty.
●
When using a cleaner or chemically treated cloth
refer to the cautions of each product.

After Use

1
Turn off the camcorder.
2
Slide OPEN/EJECT in the direction of the arrow,
then swing the cassette holder cover open until
it locks. The cassette holder opens automati-
cally. Remove the cassette.
3
Press “PUSH HERE” to close the cassette holder.
•Once the cassette holder is closed, it recedes
automatically. Wait until it recedes completely
before closing the cassette holder cover.
4
Press BATT. RELEASE and remove the battery
pack.
Lens blower
BATT. RELEASE
Button
Remove.