EN91

Warning Indications

Indications

Function

Displays the battery remaining power.

Remaining power level: high

Remaining power level: exhausted

As the battery power comes close to nil, the battery indicator blinks.

When the battery power is exhausted, power turns off automatically.

 

 

 

Appears when no tape is loaded.

(pg. 10)

 

 

 

 

 

CHECK TAPE’S

Appears when the erase protection tab is set to “SAVE” while the Power Switch is

ERASE PROTEC-

set to “ ” or “ ”.

(pg. 10)

TION SWITCH

 

 

 

 

 

 

 

 

 

Appears if dirt is detected on the heads during recording. Use an optional cleaning

HEAD CLEANING

cassette.

(pg. 95)

 

 

REQUIRED USE

 

 

CLEANING

 

 

CASSETTE

 

 

Appears if condensation occurs. When this indication is displayed, wait more than 1 hour until condensation disappears.

CONDENSATION

OPERATION

PAUSED

PLEASE WAIT

TAPE!

Appears if a tape is not loaded when the Recording Start/Stop Button is pressed

while the Power Switch is set to “

” or “

” and the Shooting Mode Dial is set

 

to “VIDEO”, “PS” or “DUAL”.

 

 

 

 

 

 

TAPE END

Appears when the tape ends during recording or playback.

(pg. 17)

 

 

 

 

SET DATE/TIME!

Appears when the date/time is not set.

 

(pg. 9)

Appears when the clock (lithium) battery is discharged and the

(pg. 9)

 

previously set date/time is erased.

 

 

 

 

ERROR!

Appears when Audio Dubbing is unavailable.

(pg. 78)

Appears if dubbing of copyguarded signals is attempted while this camcorder is

REFER MANUAL

being used as a recorder.

 

 

 

 

 

 

 

 

 

MEMORY IS FULL

Appears when the MultiMediaCard’s memory is full and shooting is not possible.

 

 

MEMORY CARD!

Appears if a MultiMediaCard is not loaded when SNAPSHOT is pressed while the

Power Switch is set to “ ” or “

” and the Shooting Mode Dial is set to “VGA”,

 

“XGA” or “DUAL”.

 

 

 

 

 

PLEASE

Appears when there is a problem with a MultiMediaCard and its memory is

FORMAT

corrupt, or it has not been initialised. Initialise the MultiMediaCard.

(pg. 53)

 

 

 

NO STORED

Appears when the Power Switch set to “

” when there are no images

IMAGE

stored in the MultiMediaCard.

 

 

 

 

 

E01 — E06

The error indications (E01 — E06) show what type of malfunction has occured.

UNIT IN SAFE-

When an error indication appears, the camcorder turns off automatically. Remove

GUARD MODE

the power supply (battery, etc.) and wait a few minutes for the indication to clear.

REMOVE AND

When it does, you can resume using the camcorder. If the indication remains,

REATTACH

consult your nearest JVC dealer.

 

 

 

BATTERY

 

 

 

 

 

 

 

Page 91
Image 91
JVC GR-DVL9800 specifications EN91, Indications