JVC GZ-EX310, GZ-EX355, GZ-E300 199, Display the screen for reading the QR code, Read a QR code

Using Wi-Fi by Creating a QR Code (GZ-EX355/GZ-EX310)

DIRECT MONITORING

oSetting (Once setting is done, start from the “Regular Operation” below)

Create a QR code.

oEnter values in the required items for direct monitoring.

0	Password: set a password to connect this camera to the device by direct	6 Tap “EXECUTE”.
	monitoring. (8 to 63 characters (64 characters in case of hexadecimal))
0	Enforced Group Owner: setting used to enable a connection with a device
	that does not support Wi-Fi Direct. Normally set to “ON”.
0	HTTP Port: Normally set to “80”.

Display the screen for reading the QR code.

1Tap “MENU”.

(Operation on this camera)

Read a QR code.

1 Read a QR code. (Operation on this camera)

0The top menu appears.

2Tap the “Wi-Fi” (Q) icon. (Operation on this camera)

2 Tap “YES”.

3Tap 1on the lower right of the screen. (Operation on this camera)

4Tap “COMMON Wi-Fi SETTING”. (Operation on this camera)

5Tap “SET FROM QR CODE”.

3Tap “OK”.

0Step 2- E is displayed.

0Set contents are saved.

oRegular Operation

Connecting the Smartphone to the Camera Wirelessly

oConnection by entering the Wi-Fi password

1Tap “MENU”.

(Operation on this camera)

Set the camera to the recording mode.

199