JVC GZ-EX355, GZ-EX310, GZ-E300 manual Preparing a DVD Writer CU-VD3 Preparing a DVD Writer CU-VD50

Copying

Preparing a DVD Writer (CU-VD3)			Preparing a DVD Writer (CU-VD50)
1	Remove the AC adapter and battery pack from this unit.	1		Remove the AC adapter and battery pack from this unit.
2	Open the LCD monitor.	2		Open the LCD monitor.

3Connect the USB cable and the AC adapter.

3Connect the USB cable and the AC adapter.

AConnect the USB cable of the DVD writer to this unit. B Connect the AC adapter of the DVD writer.

0Turn on the DVD writer.

C Connect the AC adapter to this unit.

0This unit powers on automatically when the AC adapter is connected.

0This unit turns on and the “BACK-UP” menu appears.

0While the USB cable is connected, the “BACK-UP” menu is displayed.

0Refer also to the instruction manual of the DVD writer.

4Insert a new disc.

APress the eject button to open the disc tray.

BPull out the tray completely and load a new disc properly. C Push the disc tray in until it clicks into place.

Caution :

0Be sure to turn off the power when connecting the devices. Otherwise, electric shocks or malfunctions may occur.

AConnect the USB cable provided with the DVD writer. B Connect the AC adapter of the DVD writer.

0Turn on the DVD writer.

C Connect the AC adapter to this unit.

0This unit powers on automatically when the AC adapter is connected.

0This unit turns on and the “BACK-UP” menu appears.

0While the USB cable is connected, the “BACK-UP” menu is displayed.

0Refer also to the instruction manual of the DVD writer.

4Insert a new disc.

APress the eject button. B Pull out the disc tray.

C Pull out the tray completely and load a new disc properly. D Push the disc tray in until it clicks into place.

Caution :

0Be sure to turn off the power when connecting the devices. Otherwise, electric shocks or malfunctions may occur.

Memo :

0All buttons on the DVD writer CU-VD50, other than the power and eject buttons, will not work when connected to this unit.

99