JVC GZ-EX310 151, Setting the camera to the pan cradle, Indoor MONITORING/OUTDOOR Monitoring

Using Wi-Fi (GZ-EX355/GZ-EX310)

oSetting the camera to the pan cradle.

0For how to connect the pan cradle and the camera, refer to the instruction manual of the pan cradle for further details.

1Set the camera to the pan cradle.

0For how to connect the pan cradle and the camera, refer to the instruction manual of the pan cradle for further details.

2Set the power of the pan cradle to “ON”.

3Wait until the pan cradle stops the rotation.

0When the power is turned ON, pan cradle moves to the left/right to adjust the position.

oOperations from the smartphone application

0Connect the camera and the smartphone via DIRECT MONITORING or

INDOOR MONITORING/OUTDOOR MONITORING.

“Image Monitoring via Direct Connection (DIRECT MONITORING)” (A p. 132)

“Image Monitoring via an Access Point at Home (INDOOR MONITORING)” (A p. 135)

“Image Monitoring via the Internet (OUTDOOR MONITORING)” (A p. 140)

1Start “Everio sync. 2”.

0Start the application after confirming that the smartphone is connected to this camera.

2Tap the connection method.

3Tap EF to perform the panning operation.

151