Using Wi-Fi by Creating a QR Code (GZ-EX355/GZ-EX310)

DETECT/MAIL

oSetting (Once setting is done, start from the “Regular Operation” below)

Create a QR code.

Memo :

0Perform operations in step 2 and 3 after creating a QR code, and read the QR code one by one by the camera.

oEnter values in the required items for setting the recipient’s e-mail address.

0E-mail address: set the recipient’s e-mail address.

0E-mail function: set the function of the e-mail that is transmitted to the recipient’s e-mail address.

0Up to 8 e-mail addresses can be set.

oEnter values in the required items for setting the sender’s e-mail address.

0E-mail address: set the sender’s e-mail address.

oEnter values in the required items for setting the e-mail server (SMTP server).

0SMTP server: set the name of the e-mail server (SMTP server) from which an e-mail account is obtained.

0SMTP port number: set according to the condition when the e-mail account is obtained. Normally set to “25”.

0SMTP authentication method: set according to the condition when the e- mail account is obtained.

0User name: set if the SMTP authentication method is set to other than “None”. (same as the registered user name (account name) when the e- mail account is obtained)

0Password: set if the SMTP authentication method is set to other than “None”. (same as the registered password when the e-mail account is obtained)

oEnter values in the required items for setting notification mails.

0Detection method: set the detection method of when to start recording video for notification e-mails.

0Detecting interval: select the time period to enable detection again after the previous one.

0Self recording: specify whether to save the detected video on the camera (ON) or not (OFF).

3Tap 1on the lower right of the screen. (Operation on this camera)

4Tap “COMMON Wi-Fi SETTING”. (Operation on this camera)

5Tap “SET FROM QR CODE”.

6Tap “EXECUTE”.

Display the screen for reading the QR code.

1Tap “MENU”.

(Operation on this camera)

0The top menu appears.

2Tap the “Wi-Fi” (Q) icon. (Operation on this camera)

Read a QR code.

1Read a QR code. (Operation on this camera)

2Tap “YES”.

0Contents of the screen vary depending on the QR code that is read by this unit.

212

Page 212
Image 212
JVC GZ-E300, GZ-EX355, GZ-EX310 manual 212, Mail address set the sender’s e-mail address