Using Wi-Fi by Creating a QR Code (GZ-EX355/GZ-EX310)

0How to operate from a smartphone “Using Smartphone Applications” (A p. 175)

oComputer (Windows 7)

1Tap the URL button shown on the camera’s screen. (displayed when the computer and the camera are connected wirelessly.)

0The URL for the computer to connect to appears.

2Check the URL being displayed on the camera screen, which starts from “http://”.

0After checking the URL, tap “QUIT” to return to the previous screen.

3Start Internet Explorer (web browser) on the computer and enter the URL.

INDOOR MONITORING

oSetting (Once setting is done, start from the “Regular Operation” below)

Create a QR code.

oEnter values in the required items for indoor monitoring.

0Password: set a password to connect this camera to the device via access point. (Not more than 8 characters)

0HTTP Port: Normally set to “80”.

Display the screen for reading the QR code.

1Tap “MENU”.

(Operation on this camera)

0The top menu appears.

2Tap the “Wi-Fi” (Q) icon. (Operation on this camera)

3Tap 1on the lower right of the screen. (Operation on this camera)

4Tap “COMMON Wi-Fi SETTING”. (Operation on this camera)

5Tap “SET FROM QR CODE”.

202

Page 202
Image 202
JVC GZ-EX310, GZ-EX355, GZ-E300 manual 202, Computer Windows