Preparing a BD Writer (External Blu-ray Drive)
Memo :
0When connecting this unit to the BD writer (external Blu ray drive), use an
Mini-A (male) - B (male) USB conversion cable. Please note that the
supplied USB cable cannot be used for this purpose.
0To use the USB cable provided with the BD writer (external Blu-ray drive),
purchase the following USB conversion cable.
(Part number: QAM0852-001) * Mini-A (Male) – A (Female)
*Consult your nearest service center.
1Remove the AC adapter and battery pack from this unit.
2Open the LCD monitor.
.
3Connect the USB cable and the AC adapter.
.
A Connect the USB cable of the BD writer (external Blu-ray drive) to this
unit.
0The USB cable provided with this unit cannot be used.
B Connect the AC adapter of the BD writer (external Blu-ray drive).
C Turn on the BD writer (external Blu-ray drive).
D Connect the AC adapter to this unit.
0This unit powers on automatically when the AC adapter is connected.
0This unit turns on and the “BACK-UP” menu appears.
0While the USB cable is connected, the “BACK-UP” menu is
displayed.
0Refer also to the instruction manual of the BD writer (external Blu-ray
drive).
4Insert a new disc.
.
A Press the eject button to open the disc tray.
B Load a new disc properly.
C Press the eject button to close the disc tray.
Caution :
0Be sure to turn off the power when connecting the devices.
Otherwise, electric shocks or malfunctions may occur.
0Do not connect the AC adapter provided with this unit to the BD writer.
0Do not connect the AC adapter provided with the BD writer to this unit.
Copying
91