JVC GZ-E300, GZ-EX355, GZ-EX310 manual 221, Search the access point, and select from the list

Using Wi-Fi by Creating a QR Code (GZ-EX355/GZ-EX310)

0The top menu appears.

2Tap the “Wi-Fi” (Q) icon. (Operation on this camera)

3Tap 1on the lower right of the screen. (Operation on this camera)

4Tap “COMMON Wi-Fi SETTING”. (Operation on this camera)

5Tap “ACCESS POINTS”. (Operation on this camera)

6Tap “ADD”.

(Operation on this camera)

7Tap “EZ REGISTRATION WPS”. (Operation on this camera)

8Activate WPS of the access point (wireless LAN router) within 2 minutes. 0 To activate WPS, refer to the instruction manual of the device in use.

9After registration is complete, tap “OK” on the camera’s screen. (Operation on this camera)

oSearch the access point, and select from the list.

Set the name (SSID) of the access point (wireless LAN router) and the password beforehand.

1Tap “MENU”.

(Operation on this camera)

0The top menu appears.

2Tap the “Wi-Fi” (Q) icon. (Operation on this camera)

3Tap 1on the lower right of the screen. (Operation on this camera)

4Tap “COMMON Wi-Fi SETTING”. (Operation on this camera)

221