JVC GZ-E300, GZ-EX310, GZ-EX355 - page 204

.
8Activate WPS of the access point (wireless LAN router) within 2 minutes.
0To activate WPS, refer to the instruction manual of the device in use.
9After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)
.
oSearch the access point, and select from the list.
Set the name (SSID) of the access point (wireless LAN router) and the
password beforehand.
1Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2Tap the “Wi-Fi” (Q) icon.
(Operation on this camera)
.
3Tap 1 on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
.
5Tap “ACCESS POINTS”.
(Operation on this camera)
.
6Tap “ADD”.
(Operation on this camera)
.
7Tap “SEARCH”.
(Operation on this camera)
.
0The search results appear on the camera’s screen.
8Tap the name (SSID) of the desired access point from the list of search
results.
(Operation on this camera)
.
9Register a password.
(Operation on this camera)
.
0Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
Using Wi-Fi by Creating a QR Code (GZ-EX355/GZ-EX310)
204