TV MONITORING
oSetting (Once setting is done, start from the “Regular
Operation” below)
Create a QR code.
oEnter values in the required items for the TV monitor.
0MAC address filter: set to “ON” if monitoring images with a specific TV
device.
0Add the MAC address: register the physical address when monitoring
images with a specific TV device. (Up to 8 addresses can be registered)
Display the screen for reading the QR code.
1Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2Tap the “Wi-Fi” (Q) icon.
(Operation on this camera)
.
3Tap 1 on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
.
5Tap “SET FROM QR CODE”.
.
6Tap “EXECUTE”.
.
Read a QR code.
1Read a QR code.
(Operation on this camera)
.
2Tap “YES”.
.
3Tap “OK”.
.
0Step 2- E is displayed.
0Set contents are saved.
Registering the access points (wireless LAN router) to this
unit
oWi-Fi Protected Setup (WPS) Registration
1Tap “MENU”.
(Operation on this camera)
Using Wi-Fi by Creating a QR Code (GZ-EX355/GZ-EX310)
220