JVC GZ-EX355, GZ-EX310, GZ-E300 manual Registering Human Face Personal Authentication Information

Recording

Registering Human Face Personal

Authentication Information

By registering the face of a person beforehand, focus and brightness can be
adjusted automatically by the face tracking function. Up to 6 faces, together
with names and priority levels, can be registered.
It is recommended to register the faces that are often being recorded by this
camera beforehand.
*The following is a screen of the model with Wi-Fi functions.	0 Information is collected before face registration recording. The frame
1 Open the LCD monitor.
	appears blinking while information is being collected.
	0 Adjust to fit the face within the frame while it is blinking. The frame
	stops blinking and lights up after information collection is complete.
	0 To cancel the registration, tap “STOP”.
	When “CANCEL FACE RECOGNITION?” appears, tap “YES” to
	return to the normal recording mode.
0 Set the recording mode to either A video or B still image.	7 Tap “RECORD” and record the face from the front.
0 To switch the mode between video and still image, tap Aor Bon the
recording screen to display the mode switching screen.
Tap A or B to switch the mode to video or still image respectively.
(You can also use the A/B button on this unit.)
2 Tap “MENU”.

	0	A face is captured to be used on the face registration index screen.
	0	Other than tapping “RECORD”, you can also record by pressing the
		SNAPSHOT button fully.
	0	A sound can be heard when recording is complete.
0 The top menu appears.	0	To cancel the registration, tap “STOP”.
		When “CANCEL FACE RECOGNITION?” appears, tap “YES” to
3 Tap “SETUP”.		return to the normal recording mode.
	8 Tap “YES” to continue recording.

4 Tap “FACE REGISTRATION”.	0	To proceed to collect face information in the four directions of up,
		down, left, and right, tap “YES”. It is recommended to continue
		recording to increase the accuracy of face recognition.
	0	To end face registration recording, tap “NO”. Go to step 11.

9 Rotate the face slowly in four directions to register the face information.

0Tap L to exit the menu.

0Tap J to return to the previous screen.

5Tap “REGISTER NEW FACE”.

6Point the camera toward the human subject.

0Rotate the face slowly while looking at the camera. A sound can be heard when recording is complete for each direction. (4 times in total) Repeat the step until recording (registration) is complete for all directions.

0Registration of the four directions may fail depending on the shooting environment. In this case, tap “STOP” to cancel recording, then tap “NO” and go to step 11.

0If the face cannot be properly recognized during recording, register the face again.

10 Face the camera with a smiling face.

48