JVC GZ-EX355 Image Monitoring via Direct Connection, 132, Exporting/Bringing the Unit Overseas

Using Wi-Fi (GZ-EX355/GZ-EX310)

oDo not use the Wi-Fi function outside the country of purchase.

Depending on the country, there may be restrictions on the use of radio waves and any violations could be punishable by law.

Exporting/Bringing the Unit Overseas

Permission from the U.S. government may be required when bringing the unit to an export controlled country set by the U.S. government (such as Cuba, Iraq, North Korea, Iran, Rwanda, and Syria. As of December, 2012). For more information, consult the U.S. Embassy Commercial Service.

Image Monitoring via Direct Connection

(DIRECT MONITORING)

You can check the image on the camera via direct connection (Wi-Fi Direct) with a smartphone (or computer), without the need for an access point (wireless LAN router).

0Recording of videos and still images may be performed while monitoring.

Caution :

0This function is not designed for disaster or crime prevention.

0To prevent the situation of forgetting to turn off the power, this unit will turn off automatically after 10 days of continuous usage.

0When not monitoring from a smartphone (or computer), the focus of the camera is fixed.

0Even when monitoring from a smartphone (or computer), the focus of the camera will be fixed if not operated for more than 3 hours. (Focus works again when the camera is operated.)

0You may have difficulty establishing a connection via direct monitoring in an environment where the camera is placed away from the smartphone (or computer). In this case, connect using the access point (wireless LAN router).

“Image Monitoring via an Access Point at Home (INDOOR MONITORING)” (A p. 135)

What You Need

0Smartphone or Windows computer

(A wireless LAN that is compatible with WPA2 is necessary.)

Settings Required in Advance

Set up your camera and smartphone (or computer) by performing the following operations.

For a smartphone with WPS support, refer to the “Wi-Fi Protected Setup (WPS)”.

*WPS is a method to connect the camera and the smartphone wirelessly by easy button operations.

132