.
0Tap L to exit the menu as the previous screen appears.
7Point the camera toward the human subject.
0A still image is automatically captured when smiles are detected.
.
0PHOTO lights up when a still image is being captured.
0You can display the name and smile level (%) together with the frame
by setting “SMILE%/NAME DISPLAY” in the menu to “ON” before
recording.
“Setting SMILE%/NAME DISPLAY” (A p. 50)
Memo :
0The camera is able to detect up to 16 faces. Smile levels will be displayed
for up to 3 of the largest faces displayed on the screen.
0This function may not work properly depending on the shooting conditions
(distance, angle, brightness, etc.) and the subject (direction of face, smile
level, etc.). It is also difficult to detect a smile in backlight.
0After a smile is detected and captured, it takes time before the next
recording may be performed.
0“SMILE SHOT” does not work in the following cases:
- when menu is being displayed
- when remaining recording time or battery power is being displayed
- when any functions in “SPECIAL RECORDING” is set
Caution :
0If “TOUCH PRIORITY AE/AF” is not set to “FACE TRACKING”, “SMILE
SHOT” will not work.
0If appropriate results cannot be obtained, record with “SMILE SHOT” set
to “OFF”.
Capturing Pets Automatically (PET SHOT)
“PET SHOT” automatically captures a still image upon detection of the face
of a pet, such as dogs or cats.
This function is available for both videos and still images.
*The following is a screen of the model with Wi-Fi functions.
1Open the LCD monitor.
.
0Set the recording mode to either A video or B still image.
0To switch the mode between video and still image, tap A or B on the
recording screen to display the mode switching screen.
Tap A or B to switch the mode to video or still image respectively.
(You can also use the A/B button on this unit.)
2Tap “MENU”.
.
0The top menu appears.
3Tap “RECORD SETTING”.
.
4Tap 1 on the lower right of the screen.
.
5Tap “PET SHOT”.
.
0Tap L to exit the menu.
0Tap J to return to the previous screen.
Recording
46