JVC GZ-EX355, GZ-EX310, GZ-E300 manual 216, Mail address set the sender’s e-mail address

Using Wi-Fi by Creating a QR Code (GZ-EX355/GZ-EX310)

VIDEO MAIL

oSetting (Once setting is done, start from the “Regular Operation” below)

Create a QR code.

Memo :

0Perform operations in step 2 and 3 after creating a QR code, and read the QR code one by one by the camera.

oEnter values in the required items for setting the recipient’s e-mail address.

0E-mail address: set the recipient’s e-mail address.

0E-mail function: set the function of the e-mail that is transmitted to the recipient’s e-mail address.

0Up to 8 e-mail addresses can be set.

oEnter values in the required items for setting the sender’s e-mail address.

0E-mail address: set the sender’s e-mail address.

oEnter values in the required items for setting the e-mail server (SMTP server).

0SMTP server: set the name of the e-mail server (SMTP server) from which an e-mail account is obtained.

0SMTP port number: set according to the condition when the e-mail account is obtained. Normally set to “25”.

0SMTP authentication method: set according to the condition when the e- mail account is obtained.

0User name: set if the SMTP authentication method is set to other than “None”. (same as the registered user name (account name) when the e- mail account is obtained)

0Password: set if the SMTP authentication method is set to other than “None”. (same as the registered password when the e-mail account is obtained)

Display the screen for reading the QR code.

1Tap “MENU”.

(Operation on this camera)

0The top menu appears.

2Tap the “Wi-Fi” (Q) icon. (Operation on this camera)

4Tap “COMMON Wi-Fi SETTING”. (Operation on this camera)

5Tap “SET FROM QR CODE”.

6Tap “EXECUTE”.

Read a QR code.

1Read a QR code. (Operation on this camera)

2Tap “YES”.

3Tap 1on the lower right of the screen. (Operation on this camera)

0 Contents of the screen vary depending on the QR code that is read by this unit.

3 Tap “OK”.

216