JVC GZ-EX310, GZ-EX355, GZ-E300 manual 214, Regular Operation Sending a Notification Mail

Using Wi-Fi by Creating a QR Code (GZ-EX355/GZ-EX310)

3Tap 1on the lower right of the screen. (Operation on this camera)

4Tap “COMMON Wi-Fi SETTING”. (Operation on this camera)

5Tap “ACCESS POINTS”. (Operation on this camera)

6Tap “ADD”.

(Operation on this camera)

7Tap “SEARCH”. (Operation on this camera)

0The search results appear on the camera’s screen.

8Tap the name (SSID) of the desired access point from the list of search results.

(Operation on this camera)

9Register a password. (Operation on this camera)

0Tap on the on-screen keyboard to enter characters. The character changes with every tap.

“ABC”, for example, enter “A” by tapping once, “B” by tapping twice, or “C” by tapping 3 times.

0Tap “DELETE” to delete a character.

0Tap “CANCEL” to exit.

0Tap “A/a/1” to select character input type from upper case letter, lower case letter, and number.

0Tap E or F to move one space to the left or right.

0The password is not required if the wireless LAN router is not security protected.

10 After registration is complete, tap “OK” on the camera’s screen. (Operation on this camera)

0Other methods, such as “Manual Registration” and “WPS PIN Registration” are also available. Refer to the following link for details.

“Registering the Access Points of the Camera to Connect (ACCESS POINTS)” (A p. 164)

oRegular Operation

Sending a Notification Mail.

1Tap “MENU”.

Set the camera to the recording mode.

0The top menu appears. 2 Tap the “Wi-Fi” (Q) icon.

214