JVC GZ-EX355, GZ-EX310, GZ-E300 manual Using the Touch Screen, Adjusting the Touch Panel

Getting Started

Using the Touch Screen

Icon operation buttons, thumbnails, and menu items are displayed on the touch screen according to the mode in use.

0There are two ways to operate the touch screen, namely “tap” and “drag”. The following are some examples.

A Tap the displayed button (icon) or thumbnail (file) on the touch screen to make selection.

B Drag the thumbnails on the touch screen to search for the desired file.

Memo :

0The following is a screen of the model with Wi-Fi functions.

0The touch screen of this unit is pressure-sensitive. When the touch screen does not respond smoothly, apply slightly more force to your fingertip.

0Tap the buttons (icons) on the touch screen accurately. The buttons may not respond if they are not tapped on the right area.

0Do not press or rub with excessive force.

0Do not operate the touch screen using an object with a sharp tip.

0Pressing two or more places at a time may cause a malfunction.

0Perform “TOUCH SCREEN ADJUST” if the reactive area of the screen is misaligned with the touched area. (Adjust by lightly tapping with a corner of an SD card, etc. Do not press with an object with a sharp tip or do not press hard.)

“Adjusting the Touch Panel” (A p. 15)

Adjusting the Touch Panel

Adjusts the response position of the buttons on the touch screen.

1Tap “MENU”.

2Tap “SETUP”.

*The following is a screen of the model with Wi-Fi functions.

3Tap “TOUCH SCREEN ADJUST”.

0The touch screen adjustment screen appears. 4 Tap “+”. (3 times in total)

0Keep tapping “+” as its position changes with every tap.

0If areas other than the “+” mark are tapped, errors will occur. Make sure to tap the “+” mark.

5Tap “+” again to confirm the adjusted positions. (3 times in total)

0Keep tapping “+” as its position changes with every tap. 6 Tap “OK”.

15