Capturing a Still Image in the Video DuringPlayback
You can capture still images of the scenes you like in the recorded videos.
0The following is a screen of the model with the built-in memory.
1Open the LCD monitor.
.
0Check if the recording mode is A.
0If the mode is B still image, tap B on the recording screen to display
the mode switching screen.
Tap A to switch the mode to video. (You can also use the A/B button
on this unit.)
2Tap “<<PLAY” to select the playback mode.
.
3Tap on the desired video.
.
4Tap pause e at the desired scene during playback.
.
0After pausing the video, you can fine-tune the point to capture by
tapping forward slow-motion k and reverse slow-motion l.
5Press the SNAPSHOT button.
.
Memo :
0Still images are captured with a size of 1920×1080.
0Captured still images are stored in the media where the video is being
played back from.
Combining Videos Recorded by SeamlessRecording
Videos that are recorded on two separate media and with “SEAMLESS
RECORDING” in the video recording menu enabled can be combined into
a single video.
“SEAMLESS RECORDING (GZ-EX355)” (A p. 227)
0The following is a screen of the model with the built-in memory.
1Open the LCD monitor.
.
0Check if the recording mode is A.
0If the mode is B still image, tap B on the recording screen to display
the mode switching screen.
Tap A to switch the mode to video. (You can also use the A/B button
on this unit.)
2Tap “<<PLAY” to select the playback mode.
.
3Tap “MENU”.
.
4Tap “EDIT”.
.
5Tap “SEAMLESS REC CTRL”.
.
Editing
83