JVC GZ-E300, GZ-EX355, GZ-EX310 manual 170, Setting the Password Direct Monitoring

Using Wi-Fi (GZ-EX355/GZ-EX310)

Setting the Password (DIRECT MONITORING)

Sets the password for direct monitoring. (8 to 32 characters)

1Tap “MENU”.

(Operation on this camera)

0The top menu appears.

2Tap the “Wi-Fi” (Q) icon. (Operation on this camera)

3Tap the “DIRECT MONITORING” (N) icon in the “Wi-Fi” menu. (Operation on this camera)

4Tap “PASSWORD”. (Operation on this camera)

5Register a password. (Operation on this camera)

0Tap on the on-screen keyboard to enter characters. The character changes with every tap.

“ABC”, for example, enter “A” by tapping once, “B” by tapping twice, or “C” by tapping 3 times.

0Tap “DELETE” to delete a character.

0Tap “CANCEL” to exit.

0Tap “A/a/1” to select character input type from upper case letter, lower case letter, and number.

0Tap E or F to move one space to the left or right.

0After setting, tap “SET”.

6Tap “SET”.

(Operation on this camera)

0 Settings will not be saved until “SET” is tapped.

Enabling the MAC Address Filter (TV MONITORING)

By enabling “MAC ADDRESS FILTER”, Everio can be searched from the device (TV monitor); the MAC address of the device needs to be registered to Everio in advance.

1Tap “MENU”.

(Operation on this camera)

0The top menu appears.

2Tap the “Wi-Fi” (Q) icon. (Operation on this camera)

3Tap “TV MONITORING”.

4Tap “MAC ADDRESS FILTER”.

5Select “ON” or “OFF”.

Memo :

0If “MAC ADDRESS FILTER” is enabled while no MAC address is registered, Everio can not be searched from all the devices.

170