JVC GZ-EX310, GZ-EX355, GZ-E300 169, Editing LAN Settings of Access Points Wireless LAN Router

Using Wi-Fi (GZ-EX355/GZ-EX310)

Editing LAN Settings of Access Points (Wireless LAN Router)

Change accordingly such as when you want to fix the IP address for the camera.

1Tap “MENU”.

(Operation on this camera)

0The top menu appears.

2Tap the “Wi-Fi” (Q) icon. (Operation on this camera)

3Tap 1on the lower right of the screen. (Operation on this camera)

4Tap “COMMON Wi-Fi SETTING”. (Operation on this camera)

5Tap “ACCESS POINTS”. (Operation on this camera)

6Tap “LAN SETTINGS”. (Operation on this camera)

0Tap “USE” to use the selected access point.

0Tap “DELETE” to delete the registered access point.

7Perform the LAN settings. (when “DHCP” is set to “OFF”) (Operation on this camera)

0After setting, tap “OK”.

0LAN settings comprise of the following items.

DHCP	ON: Obtains IP address from the DHCP server
	automatically.
	OFF: Settings of “IP ADDRESS”, “SUBNET
	MASK”, “DEFAULT GATEWAY”, “PRIMARY
	DNS”, and “SECONDARY DNS” are required.
IP ADDRESS	Enter the IP address.
SUBNET MASK	Enter the subnet mask.
DEFAULT	Enter the default gateway.
GATEWAY
PRIMARY DNS /	Enter the IP addresses of the primary and
SECONDARY DNS	secondary DNS servers.

169