OUTDOOR MONITORING
oSetting (Once setting is done, start from the “Regular
Operation” below)
Obtaining a Dynamic DNS Account
By obtaining a dynamic DNS account, this unit may be used on the web as
usual even if the IP address changes when making an access to this unit via
internet.
0Only the JVC dynamic DNS service can be set on this camera.
To obtain (register) an account, perform the following steps.
1Access the following URL from a browser and register for an account.
(Operation on a computer or smartphone)
https://dd3.jvckenwood.com/user/
Set your e-mail address as the username.
2Check that you have received a confirmation e-mail to the address used
in registration, and access the URL stated in the e-mail.
(Operation on a computer or smartphone)
3Set the username and password used in registration on the camera.
(Operation on this camera)
“Setting Dynamic DNS on this Camera (OUTDOOR MONITORING)”
(A p. 158)
4Execute OUTDOOR MONITORING.
(Operation on this camera)
If “OUTDOOR MONITORING” is executed while dynamic DNS settings
are enabled, the camera will access the dynamic DNS server.
5Tap “CAMERA NETWORK INFO.” to check that the URL (WAN) is
displayed.
(Registration complete)
“Image Monitoring via the Internet (OUTDOOR MONITORING)”
(A p. 140)
Caution :
0Registration will be canceled if you do not access the dynamic DNS server
from the camera within 3 days.
Perform the registration again in this case.
0Registration will not be complete if the username and password set on this
camera are incorrect. Be sure to check that they are correct.
0Successful registration will be canceled too if you do not access the
dynamic DNS server for 1 year.
Create a QR code.
oEnter values in the required items for outdoor monitoring.
0Password: set a password to connect this camera to the device via access
point. (Not more than 8 characters)
0DDNS: Set the connection environment to the internet. Normally set to
“ON”.
0User name (DDNS): set an user name for the obtained DDNS account.
0Password (DDNS): set a password for the obtained DDNS account.
0UPnP: Set to “ON” if the UPnP protocol may be used to connect the device
to the network.
0HTTP Port: Set the port number for connecting to the internet. Normally
set to “80”.
Display the screen for reading the QR code.
1Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2Tap the “Wi-Fi” (Q) icon.
(Operation on this camera)
.
3Tap 1 on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
.
5Tap “SET FROM QR CODE”.
.
6Tap “EXECUTE”.
.
Read a QR code.
1Read a QR code.
(Operation on this camera)
.
Using Wi-Fi by Creating a QR Code (GZ-EX355/GZ-EX310)
207