JVC GZ-E300, GZ-EX310, GZ-EX355 - page 213

3Tap “OK”.
.
0Step 2- E is displayed.
0Set contents are saved.
Registering the access points (wireless LAN router) to this
unit
oWi-Fi Protected Setup (WPS) Registration
1Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2Tap the “Wi-Fi” (Q) icon.
(Operation on this camera)
.
3Tap 1 on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
.
5Tap “ACCESS POINTS”.
(Operation on this camera)
.
6Tap “ADD”.
(Operation on this camera)
.
7Tap “EZ REGISTRATION WPS”.
(Operation on this camera)
.
8Activate WPS of the access point (wireless LAN router) within 2 minutes.
0To activate WPS, refer to the instruction manual of the device in use.
9After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)
.
oSearch the access point, and select from the list.
Set the name (SSID) of the access point (wireless LAN router) and the
password beforehand.
1Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2Tap the “Wi-Fi” (Q) icon.
(Operation on this camera)
Using Wi-Fi by Creating a QR Code (GZ-EX355/GZ-EX310)
213